Mining and Metallurgical Equipment by PMTS

This equipment is usually placed after each crushing/ grinding step classifying particles from coarse to fine (from 700 mm to 150 μm). There are different types of screens including: Scalping Screen, Sizing Screen, Washing Screen, and Dewatering Screen.

As a dry magnetic drum separator, belt drum separator is used to separate coarse iron ores bigger than 10 mm in size within various field intensities.

It is a device that uses magnetic properties to separate target minerals from other elements in minerals. Magnetic drum separators can be classified based on gradient, field intensity, process phase and process type. FMS can manufacture Magnetic drum separators in dry or wet, Low/ Medium/ High Intensity, all three scales: laboratory, pilot and industrial.

WHIMS/WHGMS is an equipment that uses magnetic properties to separate paramagnetic minerals from other minerals in mineral materials. This equipment can be used to separate materials with weak and medium magnetic properties and thus remove magnetic waste from non-magnetic materials. In general, the high-intensity/Gradient magnetic separator is suitable for separating fine-grained Hematite and is designed in wet modes.

This equipment has a number of rotating rolls, rotation of which causes the material to pass over and be sized.

Used in steel industries, mainly pelletizing plants, roller feeders are installed before the grate machines in order to create an even bed layer and remove dust and fine particles.

Rolls are used in roller screens and roller feeders playing a significant role in material sizing.

A modern, high performance hydraulically adjusted crusher capable of crushing all types of medium to hard mineral rocks and stones. It also offers many advantages over other crusher designs, such as low energy consumption, reliability, high efficiency (compared to other crushers), and a high reduction ratio (feed/input size compared to product/output size).

This machine is used to separate fine iron ore in various magnetic field intensities. It is designed for dry separation of iron particles smaller than 20 mm in size. Housing drum separator consists of a fixed magnetic set encompassed by a rotating steel housing.

In general, a feeder is an equipment that feeds materials at a certain rate from a material storage source to the next stage. In industrial and mining plants, these equipment are able to feed materials with dimensions of 700 mm to 400 microns, and feeders are installed in the lowest part of the hopper or bin. The main task of this equipment is feeding and controlling the feed rate.

In mineral processing operations, the most important part of the operation is process performance monitoring, which requires continuous mineral sampling.

Rotary gate is designed with a new mechanism and is used to open and close the exit path of material flow at the end of hoppers, silos and chutes and has the ability to be used in harsh conditions, high temperature and all kinds of materials with different dimensions and hardness.

X-Ray Sorter is an equipment that can detect the atomic mass of minerals and separate them using X-rays. Sorter is a completely advanced equipment that is used in the mineral processing industry as an equipment for separating minerals based on chemical and mineralogical properties.

Belt conveyors are used to transport bulk materials due to built-in advantages such as cost-effectiveness, reliability and virtually unlimited capacity options.

Conveyor belts are available in a variety of types including textile inserts and steel ropes, standard belt widths range from 650 to 2000 mm, with smaller and wider belt sizes also available depending on material and conveying capacity.

Flotation is a step-by-step process in which minerals are separated in each flotation step after being mixed with chemical reagents.

In flotation cells, separation of material happens based on the physical-chemical properties on their surfaces.